Eighth Inch Headtube Extenders.
Made of Alloy/Aluminum
Adds 20mm to your headtube- to allow for wheel/tire clearance
Makes most un-bar-spin-able bikes able to bar-spin!
Available in Black or Silver, 1" or 1 1/8"
For Threadless headsets/forks only (not threaded)
Not intended for off-road use!
PLEASE NOTE:
These headtube extenders require professional installation by a qualified bicycle shop- which has such tools as a headset press, headset cup removal tools, etc. In addition- these extenders require an additional 20mm of fork steer-tube length, which means that you will either need to remove 20mm of headset spacers, or else change forks if your fork is not long enough! The Headtube Extender will also alter your geometry- which could cause your bike to handle much differently- especially in regards to steering! Also- Eighthinch.com / Wheel and Sprocket is not responsible for frame/fork damage due to improper installations, or installations done outside of a qualified bicycle shop. Eighthinch.com / Wheel and Sprocket will not responsible for misuse of this product- including jumping, off-road use, or reckless riding!
USE AT YOUR OWN RISK!
ไม่มีความคิดเห็น:
แสดงความคิดเห็น